4m stationary scissor lift china /small hydraulic lift

4m stationary scissor lift china /small hydraulic lift

Two Types

1) One is to be installed on ground to load cargo and then lifts till a certain height for unloading the cargo.
2) The other is installed in a lift pit. Then platform table is at the same level with the ground which is convenient to load the cargo onto it. In this way it also can be called freight elevator.

Parts Introduction

1) Platform table: anti-slip checkered steel plate
2) Scissor structure: Manganese steel rectangular tube

4) Control equipment : Delixi, Siemens or Schneider brand.

5) Pump station: Italy Hydrappp or Sino-italian brand.

6) Hydro cylinder:high precision wear-resisting hydraulic cylinder with locking device for fall protection.

7) Obturating ring: Brand German Seal (made in German) or Japan VLQU Seal

Control
1) Electrical up-down control device, or manual control when the electricity Is not available.We can also install the remote control device according to your requirement.
2) The remote control and multi-control points at the different floors could be realized at each control point. Lift up, Stop and Lower down can be realized at each control point.The lift platform could stop at the accurate loaction point

Safety

1) In special circumstance, the machine will use explosion-proof electric equipment.
2) The work table can be equipped the guardrail to guarantee safety.
3) The lift can be installed hydraulic overload protective device.

4) Spillover valve: It can prevent high pressure when the machine moves up, to adjust the pressure.

5) Emergency decline valve: it can go down when you meet an emergency or the power off.

6) The machine is equipped single control solenoid valves to prevent the platform dropping if power failure.

Specifications

(The following specifications are only for your reference. We also customize it according to your demand)

Please tell us the following questions and then we will send our quotation and design drawing to you ASAP.

1)Max platform height

2)Loading capacity
3)Table size (L*W)

stationary hydraulic scissor lift platform is a kind of good stability, wide applicability of cargo lifting equipment. 4m stationary scissor lift china /small hydraulic lift used in the production line,automatic production line for the delievery of goods,material online or offline,workpiece assembly lifting operation.stationary hydraulic scissor lift According to the different job requirements and the environment 4m stationary scissor lift china /small hydraulic lift can be configured using various forms of workbench, dynamic form and other additional accessories.
JHJGHGJ
4m stationary scissor lift china /small hydraulic lift offered find high suitability for lifting heavy loads to higher heights and can achieve maximum lift height of 40 feet (12 m). We make these available in operational capacity range from 200 kg to 30000 kg and in superior finish standards that make these easily handle movement of loads to different levels. stationary hydraulic scissor lift Offering easy loading and unloading interface, these lifts can also be custom built in different sizes & capacities as demanded by the customers.